.png)
50 WATTS SOLAR STREET LIGHTING SYSTEM
50 WATTS SOLAR STREET LIGHTING SYSTEM
Certainly! Here's a table format for the technical specifications of a 50-Watts Customisez Solar Lighting generating systems-based solar street light:
| Specification | Value |
|---|---|
| Power Consumption | 50 Watts |
| Solar Panel Power | 165 Watts |
| Battery Capacity | LiPo4/ Lithium-ion 12V, 60Ah |
| LED Chip | High-efficiency LED |
| Luminous Flux | 5000-6750 Lumens |
| Color Temperature | 5000-6500 Kelvin |
| Pole | 6 Meters pole with complete structure and hardware |
| Autonomy (Backup) | 1-2 days |
| Charging Time | 6-8 hours (sunlight-dependent) |
| Lighting Time | Dusk to Dawn (automatically controlled) |
| Motion Sensor | Optional (if applicable) |
| IP Rating | IP65 (Waterproof) |
| CRI (Color Rendering Index) | >70 |
| Lifespan | 25,000-50,000 hours |
| Material | Aluminum alloy |
| Controller Type | PWM / MPPT |
| Dimensions | Varies (depends on the model) |
| Warranty | 2-5 years (depending on the model) |
| Certification | MNRE approved, BIS, ISO 14001:2015 |
| Generic | The battery is charged by electricity generated through the PV module |
Yes |
| PV Module (Wp) | 150 Wp | |
| Cycle/ Current | Battery cycle life 2000 cycle at 80% discharge |
|
| Number of batteries required for operation | 1 | |
| Type of Battery | Lithium Ferro Phosphate battery (LiFePo4) |
|
| Battery capacity(AH) | 60 | |
| Electronic components |
The self-consumption of the charge controller |
20 mA at rated voltage and rated current |
| Total electronics efficiency (%) | 90 | |
| Provision of Fuses | Fuses provided to protect against short circuit conditions |
|
| Indicators on the system | Provided with 2 LED indicators: a green light to indicate charging in progress and a red LED to indicate deep discharge condition of the battery. The green LED glow only when the battery is actually being charged. |
|
| Features | Features | Free from glare, flickering, and UV. Full protection against the open circuit, accidental short circuit and for reverse polarity provided. Operating from dusk to dawn first four hours full brightness rest of the time at a lower level, with motion sensor |
| GI Octagonal Pole with single arm |
Height | 7 M |
| Outer Dia ( Bottom) | 135 mm +/-5 mm | |
| Outer Dia (Top) | 70 mm +/-5 mm | |
| Material of Construction | S355 Confirming to BSEN 10025 | |
| The average thickness of galvanization | 65 Microns | |
| Thickness of sheet | 3mm | |
| Warranty/ Services |
Time Duration for Repairing /Replace the defect during Warranty |
Within Two week |
| Response Time to attend the complaint during Warranty |
48 Hour | |
| Contact details of manufacturer, supplier and local service agents are provided |
Yes | |
| 24 x 7 Customer Support | Yes | |
| Warranty | 24 months | |
| Installation, Testing & Commissioning |
Installation, testing & commissioning of semi-integrated Solar street light system comprising of GI octagonal pole with single arm, Solar PV module, batteries, LED luminaries with driver/ controller & other accessories including Civil work (mounting structure foundation) with suitable hardware, bolts, nuts, clamps, and connectors. NPCIL Logo shall be provided suitably on all individual poles/ metallic plate riveted on pole. The Pole number shall be painted on all individual poles with black oil paint after erection of poles. |
Yes |
| The supplier shall submit the detail drawing of the offered scheme and BOM for the entire system after the placement of PO for approval before delivery of the material. The supplier shall also submit routine test reports for GI octagonal pole covering pole dimensions and galvanization thickness, Solar PV Modules, batteries, LED luminaries |
Yes | |
| Certifications | 1) BIS certificates for the specified offered battery and luminaries. 2) IP-65 certificate for the offered luminaries |
Shall be submitted during the bid submission. |
